Običajne vrste vmesnikov kabla za industrijske kamere so naslednje:
1. USB vmesnik
A USB interface camera is a digital camera that directly outputs digital image signals. The full name of USB is Universal Serial Bus (Universal Serial Bus). The USB interface is 4 "pins", of which 2 are power lines and 2 are signal lines. USB is a serial interface, which is hot-swappable and easy to connect. USB2.0, the transmission speed is 480Mbps, the communication distance is 5m, and 80 percent of the bandwidth is used for image transmission. USB3.0, the transmission speed is 4.8Gbps, the communication distance is 10m, and 80 percent of the bandwidth is used for image transmission. Because the USB interface camera is easy to use and has a wide range of interfaces, it is currently widely used in microscopes, scientific research experiments, portable equipment and other industries.
2. IEEE1394----Vmesnik FireWire
The 1394 interface, also known as "FireWire", is used to connect digital products to computers and other machines. IEEE1394 bus is a high-speed serial bus, the highest transmission speed of 1394a is 400Mbps, and the highest transmission speed of 1394b is 800Mbps. IEEE1394 supports hot-plugging, real-time data transmission, using bus structure, and plug-and-play. The 1394 interface is divided into 4 cores and 6 cores. There are two pairs of data cables in the 4 cores. In addition to the data cables, the 6 cores also include a set of power cables to supply power to external devices. The IEEE 1394 interface does not require a controller, and can achieve peer-to-peer transmission. The maximum transmission distance of 1394a is 4.5 meters, and the transmission distance of 1394b is usually 10 meters. It can be extended to 100 meters (100Mbps) under the condition of reduced data rate. Relay equipment is used. Support can further increase the transmission distance.
3. Vmesnik Camerlink
Protokol komunikacijskega vmesnika digitalnega slikovnega signala, ki ga je predstavilo združenje AIA, je serijski komunikacijski protokol. Sprejmite standard vmesnika LVDS, s hitro hitrostjo, močno proti-zmožnostjo preprečevanja motenj in nizko porabo energije. Razvito iz tehnologije kanalske povezave so nekateri signali za krmiljenje prenosa dodani na podlagi tehnologije kanalske povezave in določeni so nekateri povezani standardi prenosa. Protokol uporablja 26-pinski konektor MDR- ali SDR-26-pinski konektor, ki ima značilnosti visoke hitrosti, pasovne širine do 6400 Mbps, močne zmožnosti preprečevanja motenj in nizke porabe energije.
4. Gige Gigabit Ethernet vmesnik
Ustvarjen in promoviran s strani AIA (Automatde Imaging Association), je standard vmesnika za kamero, razvit na podlagi komunikacijskega protokola Gigabit Ethernet. Idealno za industrijske slikovne aplikacije za prenos nestisnjenih video signalov po omrežju. Je standard za prenos slik na dolge razdalje z uporabo poceni kablov.
5. CoaXPress
CoaXPress je asimetrični visoko{0}}hitrostni standard digitalnega vmesnika od točke do{2}}od točke do točke s hitrostjo prenosa do 6,25 Gbps in razdaljo prenosa več kot 100 m. Obseg prenosa podatkov je velik, razdalja prenosa je dolga, razdaljo prenosa in obseg prenosa pa je mogoče izbrati: od 50m@6.25Gbps do 170m@1.25Gbps, cena je nizka, enostavna za integracijo in podpira vroče zamašitev.
